Panasonic DX-600 Service Manual page 44

2.2.18. Toner Sensor (513), Laser Unit [LSU] (512), SNS3 PC Board (1009)
(2)
(4)
(6)
DX-600
DX-600
(9)
(8)
Edition 1.0
(3)
(5)
(7)
DX-800
(8)
(9)
(1) Remove the Transmit Guide Assembly
(Refer to 2.2.4.).
(2) Remove 2 Screws (19).
(3) Remove Ground Wire (542).
(4) Remove the CCD Shield Plate (533).
(5) Remove 1 Screw (19).
(6) Disconnect Connector CN84 on the SNS3 PC
Board (1009).
(7) Remove the Toner Sensor Spring Plate (506)
Assembly.
Note:
When reinstalling, make sure that the Toner
Sensor Spring Plate is inserted into the 2 notches
in the main frame as shown in the illustration.
(8) Remove the Toner Sensor (513).
(9) Disconnect the Connector on the Toner Sensor.
44
DX-600/800
APR 2002