Panasonic KX-TDA100D Features Manual page 341

a.
Day/Night button
b.
Day/Night/Lunch button
c.
Day/Night/Break button
d.
Day/Night/Lunch/Break button
Each of these buttons is used for switching between modes. For example, pressing the Day/Night button
switches between day and night modes. All of these buttons show the current status as follows:
Light Pattern
Off
Red on
Green on
Slow green flashing
Slow red flashing
Note
Any extension user (except extension users allowed to change the mode) can only check the current
status on the display by pressing the Time Service button.
Conditions
•
PT programming can set the Start and/or End time of the following:
–
Day-1 (Day Start time)
–
Lunch (Lunch Start time)
–
Day-2 (Lunch End time)
–
Night (Night Start time)
PC programming can also set the following three time periods for break mode per day.
–
Break-1 Start
–
Break-1 End (Day restart)
–
Break-2 Start
–
Break-2 End (Day restart)
–
Break-3 Start
–
Break-3 End (Day restart)
•
Time Service Switching Mode (Automatic/Manual) Button
A flexible button can be customised as the Time Service Switching Mode (Automatic/Manual) button.
PT Programming Manual References
[101] Time Service Switching Mode
[102] Time Service Starting Time
[514] Time Service Manual Switching
Feature Guide References
1.9.1 Toll Restriction (TRS)/Call Barring (Barring)
1.20.2 Flexible Buttons
2.2.1 Class of Service (COS)
2.2.3 Tenant Service
3.1 Capacity of System Resources
Status
Day mode
Night mode
Lunch mode
Break mode
Holiday mode
2.2.4 Time Service
Feature Guide 341