Panasonic KX-TDA100D Features Manual page 264

1.26.3 Call Charge Services
6.
Call Charge Management
An extension assigned as a manager can perform the following:
a.
Clear the call charges for each extension and verification code.
b.
Clear the call charges of all extensions and verification codes.
c.
View the call charges (Call Charge Reference) for each trunk, extension, or verification code.
d.
Set the call charge rate for each trunk group.
e.
Print out the total call charges for all extensions and verification codes.
f.
Set a budget for each extension and verification code.
[Examples of Call Charge Reference]
******************************************************
* Charge Meter Print Out - Total & All CO
******************************************************
Total Charge:
CO Line
001: 00194.00
*******************************************************
* Charge Meter Print Out - All Extensions
*******************************************************
*775: 00194.00
104: 00194.00
Note
*: extension or verification code number
Conditions
[General]
•
Call Charge Reference by Call Charge Reference Button
A display telephone user can check the total call charge for his own extension using the Call Charge
Reference button. A flexible button can be customised as the Call Charge Reference button.
[Pay Tone Service]
•
It is possible to select whether the PBX starts counting the call charge from when the PBX detects the
answer signal from the telephone company.
•
It is possible to enable the PBX to send the flash/recall signal to the telephone company after a conversation
(in on-hook status) to receive the call charge information.
PT Programming Manual References
[010] Charge Margin
[011] Charge Tax
[012] Charge Rate per Unit
[130] Decimal Point Position for Currency
[131] Currency
[491] Pay Tone Signal Type
264 Feature Guide
00175.95
002: 00073.00
*102: 00073.00
105: 00073.00
*
003: 00161.00 004:
*
*776: 00161.00
106: 00161.00
107:
00033.00
00033.00