Panasonic KX-TDA100D Features Manual page 258

1.26.1 Station Message Detail Recording (SMDR)
Number in
the Pattern
(9)
(10)
[Programmable Items]
Outgoing trunk call
Incoming trunk call
Outgoing intercom call
Log-in/Log-out status
ARS dial
Caller's identification
DID/DDI number
Secret dialling
258 Feature Guide
Item
CD (Condition Shows other call information with the following codes:
Code) CL: Collect call
TR: Transfer
FW: FWD to trunk
D0: Call using DISA or TIE line service
RM: Remote maintenance (modem) (® 2.3.1 PC Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Cost Shows the call charge.
Item
Controls whether the outgoing trunk calls are shown. This setting
is common throughout the PBX. COS programming is also
required.
® [804] SMDR Outgoing Call Printing
Controls whether the incoming trunk calls are shown.
® [805] SMDR Incoming Call Printing
Controls whether the outgoing intercom calls are recorded.
Controls whether the log-in/log-out status is recorded.
Controls whether the user-dialled number or the modified number
is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (® 1.10.1 Automatic Route
Selection (ARS))
Controls whether the caller's identification number, name,
number and name, or nothing is shown. If "none" is selected, <I>
will not be shown.
Controls whether the DID/DDI number, name, number and name,
or nothing is shown. If "none" is selected, <D> will not be shown.
Controls secret dialling. If enabled, the dialled number will be
shown as dots.
This setting is effective only when the modified number is selected
in ARS dial setting above. If the user-dialled number is selected
in ARS dial setting, the dialled number will be shown as dots
regardless of this setting.
Description
Description