Panasonic KX-TDA100D Features Manual page 28

1.1.1 Incoming Trunk Call Features
When the original destination is:
•
PS Ring Group
•
External Pager (TAFAS)
•
Analogue/ISDN Remote Maintenance
•
Other PBX Extension (TIE with no PBX Code)
*1 Intercept Routing for DISA will redirect a call only if all of the Direct Inward System Access (DISA) ports are busy. Once the call
reaches the destination extension by using the DISA feature, the Intercept Routing feature of the extension is used.
*2 By assigning the forward destination of a Virtual PS to a PS Ring Group or external pager, and assigning Intercept Routing destinations
to the Virtual PS, calls to these destinations will be redirected to the Intercept Routing destination of the Virtual PS.
Programming Example
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS
<Intercept Destination of Virtual PS>
Ext. No. of the Virtual PS
When extension 2001 is called from another extension or is the first destination
of an incoming trunk call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
Different intercept destinations can be programmed for each time mode (day/lunch/break/night).
[Available Intercept Destinations]
Wired Extension (PT/SLT/ISDN Extension/T1-OPX)
PS
Incoming Call Distribution Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
28 Feature Guide
*2
*2
FWD Destination
2001
...
Day
2001 1001
... ...
Intercept Destination
The Available Intercept Destination is:
Not assignable (Intercept Routing is not available.)
"600" is an example of a
Floating Extension No.
for the External Pager
600
...
Intercept Destination
Lunch Break Night
1001 1001 1001
... ... ...
...
...
...
Availability
ü
ü
ü
ü
ü
ü
ü
ü
ü