Panasonic KX-TDA100D Features Manual page 179

Recording Quality
High
Middle
(default)
Low
When an ESVM card is used for the OGM feature, the recording quality can be set separately (®
1.17.5 Outgoing Message (OGM)).
When using an ESVM card for both the SVM feature and OGM feature, the first 64 messages in the card are
saved for OGM use and the remaining 186 messages will be for SVM use, as shown below:
SVM Use: Disabled
OGM Use: Enabled
ESVM4 Card
Block A
OGM Use:
64 Messages
Block B
OGM Use:
64 Messages
If the sum length of all recorded voice messages exceeds 90 % of total space on the card, the display informs
all extension users belonging to that card that the card is almost full. Users will hear dial tone 3 when going
off-hook.
Floating Extension No. and Destination
An extension user can set incoming calls to be redirected to his message box on the ESVM card when he
cannot answer them. The user can set the floating extension number of the ESVM card as the destination for
redirected calls. Then, the ESVM card answers redirected calls, plays back the relevant greeting message,
and records a voice message. Incoming calls can be redirected to an ESVM card by the following methods:
–
Call Forwarding (FWD) (® 1.3.1.2 Call Forwarding (FWD))
–
Intercept Routing-No Answer/Busy/DND (® 1.1.1.6 Intercept Routing)
[Programming Example for Intercept Routing]
Extension No.
101
102
301
(Operator)
In this example:
Recording Time with the ESVM2/ESVM4 Card
about 20 minutes
about 60 minutes
about 120 minutes
SVM Use: Enabled
OGM Use: Enabled
ESVM4 Card
Block A
OGM Use:
2 CH 64 Messages
Block B
OGM Use:
2 CH
64 Messages
Assigned ESVM Card
No.
1
1
2
1.17.8 Built-in Simplified Voice Message (SVM)
SVM Use:
186 Messages
2 CH
SVM Use:
2 CH
186 Messages
Intercept Destination
Day Lunch
102 591
103 591
– –
SVM Use: Enabled
OGM Use: Disabled
ESVM4 Card
Block A
SVM Use:
2 CH
250 Messages
Block B
SVM Use:
2 CH
250 Messages
Break Night
591 591
591 591
– 591
Feature Guide 179