Panasonic KX-TDA100D Features Manual page 130

1.10.1 Automatic Route Selection (ARS)
[Command Explanation]
Command
Number
[Programming Example]
Carrier Table
7
8 Carrier Name
Removed Number of Digits
9
Carrier Access Code
10
Trunk Group
11
Modify Command
12
6.
Optional Assignment
Authorisation Code for a Tenant
An Authorisation code can be assigned for each carrier and each tenant.
Authorisation Code for a Trunk Group
An Authorisation code can be assigned for each trunk group and each carrier.
Itemised Billing Code
An Itemised Billing code can be assigned for each extension and for each verification code.
If a call is not made from an extension (e.g., DISA or TIE) and no verification code is used, the Itemised
Billing code assigned in the location 1 of the verification code will be used.
130 Feature Guide
Add the number.
C Add the Carrier Access code.
P Analogue Line: Insert a pause.
ISDN/T1/E1 Line: Insert a pause and change to tone (DTMF) signal.
A Add the Authorisation code for a tenant (
G Add the Authorisation code for a trunk group (
I Add the Itemised Billing code (
H Add the dialled number after the digits are removed (Home position).
1
A telecom B telecom
6 0
0077 0088
1, 2, 3 1, 2
CH#12 CH
[Example]
Dialled number: 0123456789
(Trunk Access no. is ignored.)
Modification:
012345 6789
Remove 6 digits.
9
15
Description
2
12
0077 6789 #12
H
#12 Add the number.
Add the Carrier Access
C
code ( ).
10
13
14
).
13
).
14
).
15