Panasonic KX-TDA100D Features Manual page 259

Privacy dial
Date order
Received call
Answered call
Room status
Timed Reminder call
Printing Message
Time format
Conditions
•
SMDR Format
The following SMDR format can be set through system programming in order to match the paper size being
used in the printer:
a.
Page Length: determines the number of lines per page.
® [802] SMDR Page Length
b.
Skip Perforation: determines the number of lines to be skipped at the end of every page.
® [803] SMDR Skip Perforation
The page length should be at least four lines longer than the skip perforation length.
Explanation:
Skip
Perforation
•
SMDR data is not deleted even if the PBX is reset.
•
If the PBX is reset during a conversation, the call will not be recorded on SMDR.
•
The following calls are regarded as two separate calls for SMDR:
–
Calls before and after the flash/recall/EFA signal is manually sent during a conversation
Item
Enables or disables privacy dial. If enabled, the last four digits of
the dialled telephone number and any additional digits after
connection will be shown as "X". (e.g., 123-456-XXXX)
The date order is changeable: month/day/year, day/month/year,
year/month/day, year/day/month.
Controls whether the time of receiving an incoming trunk call is
shown.
Controls whether the time of answering an incoming trunk call is
shown.
Controls whether room status changes are shown.
Controls whether Timed Reminder calls are shown (®
1.28.4 Timed Reminder).
Specifies the messages that can be selected from an extension
(® 1.26.2 Printing Message).
Controls whether time is displayed in 12-hour or 24-hour format.
Page
Length
Machine
Perforation
1.26.1 Station Message Detail Recording (SMDR)
Description
Feature Guide 259