Suzuki GZ250 Marauder Service Manual page 68

3-31 ENGINE
• Apply molybdenum oil solution to the valve stems.
CAUTION
When inserting each valve, take care not to dam-
age the lip of the stem seal.
• Install the valve springs with the smaller pitch
the cylinder head.
• Install the valve spring retainer , press down the spring
using the valve lifter and then install the cotter halves
onto the valve stem end. Then, release the valve lifter to
allow the cotter
the valve stem. Be sure that the rounded lip
cotter fits snugly into the groove
09916-14510: Valve lifter 09916-14910:
Valve lifter attachment 09916-84511:
Tweezers
CAUTION
Be sure to install all of the parts in their original
positions.
INTAKE PIPE
• When installing the intake pipe, apply grease to the CD-
ring.
99000-25010: SUZUKI SUPER GREASE "A"
CAUTION
Use the new O-ring to prevent sucking air from
the joint.
Downloaded from www.Manualslib.com
to wedge between the retainer and
manuals search engine
facing
of the
in the stem end.
Tow ards
Head