Suzuki GZ250 Marauder Service Manual page 43

3-7 ENGINE
• Tighten the engine ground wire and the clamp by crank-
case bolt as shown.
• Clamp the neutral switch lead wire
switch lead wire
• Position the carburetor clamps as shown in the illustra-
tion.
• Install the clutch release arm as shown In the illustration.
NOTE:
Align the release arm slit surface
on the release camshaft.
• Loosen the rear axle nut and drive chain adjuster nuts.
• Install the engine sprocket as shown.
• Install the drive chain.
• Tighten the engine sprocket nut
torque.
Engine sprocket nut: 90 N-m (9.0 kg-m, 65.0 Ib-ft)
NOTE:
When tightening the engine sprocket nut, depress the rear
brake pedal.
• Bend the lock washer securely.
Downloaded from www.Manualslib.com
with the notch mark
to the specified
manuals search engine
and side-stand