Removal - Suzuki GZ250 Marauder Service Manual

REMOVAL

• Remove the clip
• Remove the cotter pin, torque link nut
• Remove the rear axle nut
• Raise the rear wheel off the ground with a jack or wood-
en block.
• Loosen the drive chain adjusting nuts
• Remove the rear axle.
• Disengage the drive chain from the rear sprocket.
• Remove the rear wheel.
• Remove the rear brake panel
• Remove the rear sprocket
the rear wheel.
NOTE:
Before separating the rear sprocket and mounting drum,
slightly loosen the rear sprocket bolts.
• Remove the rear sprocket damper
• Remove the drive chain guide
from the rear sprocket mounting drum.
• Remove the brake shoes from the brake panel.
Downloaded from www.Manualslib.com
and rear brake adjusting nut
with mounting drum from
and rear sprocket
manuals search engine
and bolt.
, left and right.
CHASSIS 5-30