Battery; Specifications; Initial Charging - Suzuki GZ250 Marauder Service Manual

6-31 ELECTRICAL SYSTEM

BATTERY

SPECIFICATIONS

Type designation
Capacity
Standard electrolyte
S.G.

INITIAL CHARGING

FILLING ELECTROLYTE
• Remove the aluminum tape
filler holes
* Remove the caps from the electrolyte container.
NOTE:
* Do not remove or pierce the sealed areas
trolyte container.
* After completely filling the battery with electrolyte, use
the caps
battery filler holes.
• Insert the nozzles of the electrolyte container
battery's electrolyte filler holes. Hold the electrolyte con-
tainer firmly so that it does not fall. Do not allow any of
the electrolyte to spill.
• Make sure that the air bubbles
electrolyte container and leave the electrolyte container
in this position for more than 20 minutes.
Downloaded from www.Manualslib.com
FTX7L-BS
12V, 21.6 kC(6Ah)/10HR
1.320 at 20°C (68°F)
which seals the battery
from the electrolyte container to seal the
rise to the top of each
manuals search engine
Upper cover
breather
Cathode
plates
Separator
(fiberglass
plate)
Anode
plates
of the elec-
into the
Filter
Stopper
Terminal
Safety valve