Suzuki GZ250 Marauder Service Manual page 41

3-5 ENGINE
• Support the motorcycle with a jack or wooden block.
• Remove the engine mounting bolts and nuts
• Remove the frame down tube mounting bolts and nuts
• Remove the lower engine mounting bolt and nut
• Remove the upper engine mounting bolt and nut
NOTE:
When removing the upper mounting bolt, support the en-
gine with a jack.
• Remove the left and right swingarm pivot end caps.
• Remove the swingarm pivot nut
• Partially remove the swingarm pivot shaft so that the
engine can be removed.
NOTE:
Be careful not to draw out the pivot shaft.
• Gradually lower the engine.
Downloaded from www.Manualslib.com
and washer.
manuals search engine