VC4G & VC6G SERIES FULL SIZE CONVECTION OVENS - REMOVAL AND REPLACEMENT OF PARTS
Fig. 7
COMPONENT PANEL
COMPONENTS
electrical power to the machine and
follow lockout / tagout procedures.
Removable Components Procedure
1.
Remove the Right Side Panel.
NOTE: If right side panel is not accessible, this
component can be serviced by removing the Control
Panel.
2.
Disconnect the wire leads to the component
being replaced.
3.
Remove the component.
4.
Reverse the procedure to install the replacement
component and check oven for proper operation.
Disconnect the
Page 9 of 75
Fig. 8
F24682 Rev. D (1016)