Component Panel Components; Procedure - Vulcan-Hart SG4C Service Manual

COMPONENT PANEL COMPONENTS

PORCELAIN
BLOCK
ASSEMBLY
SG4D/SG6D

Procedure

procedures.
1. Remove the right side panel as outlined under Covers and Panels.
2. Disconnect the wire leads to the component being replaced.
3. Remove the component.
4. Reverse the procedure to install the new component and check oven for proper operation.
PORCELAIN
BLOCK
ASSEMBLY
TRANSFORMER
HEATING
RELAY
IGNITION
MODULE
BOARD
IGNITION
MODULE
PL-56047
Disconnect the electrical power to the machine and follow lockout / tagout
HEATING
RELAY
PORCELAIN
BLOCK
ASSEMBLY
SG4C/SG6C
– 9 –
PORCELAIN
BLOCK
ASSEMBLY
TRANSFORMER
MOTOR
CONTROL
RELAYS
IGNITION
MODULE
BOARD
IGNITION
MODULE
PL-56048