Creating An Mpclii Format Packet - Paxar TC6037PR Reference Manual

C r e a t i n g a n M P C L I I F o r m a t P a c k e t
A format defines which fields appear and where the fields are printed on the
label. The printer requires this information in a special form. This section
describes how to create a sample MPCLII format packet.
Make sure supplies are loaded, you have a fully charged battery, the printer
is connected to a host and ready to receive data, and you have software in
the printer. Refer to your Equipment Manual for more information.
1.
Type the following format header in any text editor:
{F,25,A,R,E,200,200,"FMT-25" p
2.
Type the following constant text field:
C,140,40,0,1,2,1,W,C,0,0,"SAMPLE FORMAT",1 p
3.
Type the following bar code field:
B,1,12,F,85,40,1,2,40,5,L,0 p
4.
Type the following text field:
T,2,18,V,50,50,1,1,1,1,B,L,0,0,1 p}
For detailed information about the format header, text, constant text, and
bar code fields, see Chapter 2, "Defining Fields." For information about
batch packets, see Chapter 5, "Printing."
1-2 Getting Started