Paxar TC6037PR Reference Manual page 96

268
Word length selection must be 1 (8 bits).
269
Stop bits selection must be 0 (1 bits).
270
Parity selection must be 0 (none).
271
Flow control selection must be 3 (XON/XOFF).
272 Symbol set (code page) in the System Setup packet must be
0 (Internal), 1 (ANSI), 2 (DOS 437), 3 (DOS 850), 4 (1250- Latin
2), 5 (1251- Cyrillic), 6 (1252- Latin 1), 7 (1253- Greek), 8 (1254-
Turkish), 9 (1255- Hebrew), 10 (1256- Arabic), 11 (1257- Baltic),
12 (1258- Vietnamese), 13 (852- Latin 2), 14 (855- Russian), 15
(857- IBM Turkish), 16 (860- DOS Portuguese), 17 (Wingdings),
18 (Macintosh), 19 (Unicode), 20 (BIG5), 21 (GB), 22 (SJIS to
SJIS), 23 (GB to GB), 24 (BIG5 to BIG5), or 25 (KSC to KSC).
282
RS232 Trailer string is too long. Use a maximum of 3 characters.
283
ENQ Trailer string is too long. Use a maximum of 3 characters.
284
The buffer type must be T (Transmit), R (Receive), I (Image), F
(Format), or D (Downloadable Fonts).
285 The storage device type in the memory configuration packet must
be R (volatile RAM).
286 The buffer size is invalid.
287
The printhead width must be 0.
288
Invalid battery voltage packet. Must be 0 or 1.
289
Invalid printer address in communication settings packet. Use 0
or none.
6-10 Troubleshooting