Paxar TC6037PR Reference Manual page 69

G4. device Graphic storage device:
R
T
F
Note:
G5. units Unit of measure. Options:
E
M
G
G6. row Distance between the bottom of the graphic image area and the first bitmap
line. This is usually 0, unless you want a fixed amount of white space
around the graphic image. See "Positioning the Graphic Image," for more
information.
English
Metric
Dot
G7. column Distance between the left edge of the graphic image area and the left edge
of first bitmap line. This is usually 0, unless you want a fixed amount of
white space around the graphic image. See "Positioning the Graphic
Image," for more information.
English
Metric
Dots
G8. mode Imaging mode. Enter 0.
G9. "name" Graphic name (optional), 0-8 characters, enclose in quotation marks.
Example
Adds a graphic image identified by number 99 to volatile RAM. The graphic
uses dot measurement. The image will be placed according to the row and
column parameters in the graphic field. The imaging mode is 0 and the
image is called 99Wire.
Volatile RAM (format must contain a graphic field)
Temporary Storage
Flash Memory
If you are using flash memory, send the graphic only once. Then,
send only batches to reference it. If you re-send the graphic each
time, it creates separate copies, and eventually fills up flash
memory.
English, measured in 1/100 inches
Metric, measured in 1/10 mm
Graphic, measured in dots. For bitmapped graphics,
G is the only valid option.
0 - 365
0 - 927
0 741
0 - 189
0 - 480
0 - 383
{G,99,A,R,G,0,0,0,"99Wire" p
Creating Graphics 4-11