Placing The Graphic In A Format; Defining The Graphic Field - Paxar TC6037PR Reference Manual

P l a c i n g t h e G r a p h i c i n a F o r m a t
To include a graphic within a format:
1.
Design the graphic image as shown in "Designing Bitmapped Images."
2.
If you are using RAM, place a graphic field in the format file to reference
the graphic. See the following section, "Defining the Graphic Field," for
more information.
Note: If you are using temporary storage, you do not need a graphic field
in your format to reference the graphic image.
3.
Download all the necessary packets (check digit, format, etc.).
4.
Send the graphic file to the printer, if you have not already done so.
See "Creating a Graphic Packet" for more information.
D e f i n i n g t h e G r a p h i c F i e l d
The graphic field in a format references the graphic image by the graphID in
the graphic header. This field is required only if the graphic will be
stored in RAM.
Syntax
G1. G Graphic Field.
G2. graphID Unique number from 0 - 999 to identify the graphic image.
G3. row Distance between the bottom of the print area on the supply to the bottom
of the graphic image. Measured in selected units.
English
Metric
Dot
The row specified in the constant text, bitmap, line, or box field is added to
the row value above to determine the actual position in the format.
G,graphID,row,col,mode,rotation p
0 - 365
0 - 927
0 741
Creating Graphics 4-19