Paxar TC6037PR Reference Manual page 38

L5. angle If Using Segments:
/end row
Row location of ending point. Measure from bottom of
print area. Ranges same as row above. On
horizontal lines, this value must match item L3.
If Using Vectors:
Angle of line. Options: 0, 90,
180, or 270.
L6. length/ If Using Segments:
end col
Column location of end point. Measure from left edge of print area.
Ranges same as column above. On vertical lines, this value must match
parameter L4.
If Using Vectors:
Length of the line in selected units.
Ranges for horizontal lines:
English
Metric
Dots
Ranges for vertical lines:
English
Metric
Dot
2-20 Defining Fields
0 - 189
0 - 480
0 - 383
0 - 365
0 - 927
0 - 741