Proportional Font Magnification - Paxar TC6037PR Reference Manual

Bold
1/100 in.
1/10 mm
dots
P r o p o r t i o n a l F o n t M a g n i f i c a t i o n
Each character in a proportionally spaced font is a different height and
width. You may be able to place more characters on a line using
proportionally spaced fonts. You may want to experiment with these fonts
and adjust field measurements in your format as needed. The bitmapped
fonts (either monospaced or proportional) appear jagged when magnified.
The magnification range is 1 - 7.
The following tables provide height and width magnification of sample
characters.
C G T r i u m v i r a t e ™ T y p e f a c e B o l d ( 8 p t . )
Width Mag.
1x 1/100 in.
1/10 mm
Dots
7x 1/100 in.
1/10 mm
Dots
To calculate other font widths, multiply the font dots (3 dots for Minimum, 13
dots for Average, 22 dots for Maximum) by the magnification.
B-6 Fonts
1xu
Minimum
1.56
3.97
3
6.9
17.5
14
{ 7 x
16.7
42.4
34
Average
5.73
14.55
11
20.7
52.6
42
117.24
297.8
238
Maximum
10.94
27.78
21
41.4
105.2
84