Error Messages - Bernina 700 Manual

Attachment

7.3 Error messages

Message on the display
98
Cause
The selected needle and stitch
plate cannot be used in
combination.
The needle is not at its top end.
The upper thread is used up.
The upper thread has broken.
The bobbin thread is used up.
The bobbin thread has broken.
The main motor isn't running.
The fabric under the presser foot
is too thick.
0371485.0.04_2016-05_Manual_B700
Repair
> Replace the needle.
> Replace the stitch plate.
> Adjust the needle position via the handwheel.
> Rethread.
> Rethread.
> Rethread.
> Clean the hook.
> Rethread.
> Turn the handwheel clockwise until the needle is at its
top position.
> Remove the stitch plate.
> Remove the thread remnants.
> Clean the hook.
> Remove the hook and make sure that there are no
pieces of broken needle points on the magnetic back of
the hook.
> Reduce the fabric thickness.