Recovering Saved Data; Cleaning The Thread Catcher - Bernina 700 Manual

> Touch the icon «Updating the machine».
UPDATE
> Touch the icon «Save data on USB stick».
– The icon is tagged with a green check mark.
> Touch the icon «Update» to start the update of the software.
Update
Update

Recovering saved data

NOTICE
BERNINA USB stick (Optional accessory) has been removed too early
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (Optional accessory) only after the saved data has been transferred
successfully.
If personal data and settings after a software update are not available anymore, they can be transfered to the
machine again afterwards.
> Insert the BERNINA USB stick (Optional accessory) providing the saved data and settings into the USB port
of the machine.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Updating the machine».
UPDATE
> Touch the icon «Transfer saved data to machine».
– The icon is tagged with a green ckeck mark.

Cleaning the thread catcher

In chapter «Maintenance and cleaning» there are additional illustrated step-by-step instructions.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
0371485.0.04_2016-05_Manual_B700
Setup Program
61