Calibrating The Display; Back To Basic Setting; Deleting User Data - Bernina 700 Manual

Setup Program

Calibrating the display

Please find further information on this topic in the chapter attachment below troubleshooting at the end of
the instruction manual.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Calibrate the display».
> Touch the crosses in sequence using the touchscreen pen.

Back to basic setting

ATTENTION: Using this function will delete all individually made settings.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Basic settings».
> Touch the icon «Basic setting Embroidering».
> Touch the icon «Confirm» to restore basic settings for the embroidery settings.

Deleting user data

Motifs which are not needed anymore can be deleted so that there will be more capacity for new motifs.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
59
0371485.0.04_2016-05_Manual_B700