Setup Program; Embroidery Settings; Adjusting The Upper Thread Tension; Adjusting The Maximum Embroidering Speed - Bernina 700 Manual

3

Setup Program

3.1 Embroidery settings

Adjusting the upper thread tension

Alterations of the upper thread tension in the Setup Program affect all embroidery motifs. The settings in the
Setup Program remain active even after switching the machine off.
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Adjust the upper thread tension».
> Move the slide using the touchscreen pen/finger or touch the icons «+» or «-» to alter the upper thread
tension.
> Touch the yellow-framed icon to reset the alterations to basic setting.

Adjusting the maximum embroidering speed

By using this function, the maximum speed can be reduced.
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Alter the maximum speed».
> Move the slide using the touchscreen pen/finger or touch the icons «+» or «-» to alter the maximum
RPM
speed.
> Touch the yellow-framed icon to reset the alterations to basic setting.

Centering the embroidery motif

When the embroidery motif is openend on the machine, it is always centered to the embroidery hoop. If you
want the embroidery motif to be opened in its original position (defined by the BERNINA embroidery
software), the function «Center the embroidery motif» must be activated.
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Center the embroidery motif».
> Press the switch in the right section.
– A previously moved embroidery motif which has been saved in the new position is opened in the
saved position after selecting.
0371485.0.04_2016-05_Manual_B700
Setup Program
53