Creative embroidering
Embroidery sequence control when thread breaks
When the thread breaks, the needle can be repositioned in the embroidery motif by means of the
embroidery sequence control.
> Select the embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Embroidery sequence control when thread breaks».
> Select the desired position in the compact view using the touchscreen pen or the finger.
> Turn the «Upper Multifunctional knob» to move the hoop stitch by stitch.
> Turn the «Lower Multifunctional knob» to move the hoop in large steps.
> Touch the icon «0-9» to select the desired stitch by entry.
0-9
0-9
Cutting connecting stitches
The function is activated by default and the connecting stitches are cut automatically. When the function is
deactivated, the connecting stitches between the embroidery motifs must be cut manually.
> Select the embroidery motif.
> Touch the icon «Embroidering».
> Touch the yellow-framed icon «Cutting connecting stitches» to deactivate the function.
Reducing color changes
When the embroidery motifs overlap, the color changes cannot be reduced.
> Select the embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Reduce color changes».
Multi-colored embroidery motif on/off
Multi-colored embroidery motifs can also be embroidered in one color.
> Select the embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Multi-colored embroidery motif on/off».
84
– In the left section of the display a compact view of the embroidery motif is displayed. On the right side
the enlarged embroidery motif is displayed.
– Identical colors of the embroidery motif are collected to one color.
– The embroidery motif is embroidered in one color.
0371485.0.04_2016-05_Manual_B700