Altering The Stitch Density; Checking The Embroidery Motif Size And Position - Bernina 700 Manual

Creative embroidering
> Touch the icon «Change the stitch type».
> Touch the switch in the upper section of the display (1) to change the satin stitch to the step stitch.
> Adjust the desired stitch length (2) with the icons «-» or «+».
2
1

Altering the stitch density

If the satin stitches are embroidered too densely, the stitch density can be adjusted.
> Select the embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Change the stitch type».
> Adjust the desired stitch density (1) with the icons «-» or «+».
1

Checking the embroidery motif size and position

It can be checked whether or not the embroidery motif matches the designated position/location on the
fabric. Points which are beyond the embroidery hoop are not traveled to.
> Select the embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Check the embroidery motif size» or
check
> push the button «Check the embroidery motif size».
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display.
71
0371485.0.04_2016-05_Manual_B700