Errors And Faults; Error Messages - Bernina 790 PRO Manual

Errors and Faults

18 Errors and Faults

18.1 Error Messages

Message on the Display
182
Cause
Stitch number unknown.
Selection of stitch patterns not
possible in Combi-mode.
The feed dog is not lowered.
The selected needle and stitch
plate cannot be used in
combination.
The selected presser foot does
not match with the fitted presser
foot.
The needle is not at its top end.
The upper thread is used up.
The upper thread has broken.
Solution
> Check the entry and enter the new number.
> Combine other stitch patterns.
> Push the button «Feed Dog Up/Down» to lower the
feed dog.
> Replace the needle.
> Replace the stitch plate.
> Select the fitted presser foot in the presser foot selection
or change the presser foot.
> Adjust the needle position via the handwheel.
> Rethread.
> Rethread.