Combining Embroidery Motifs - Bernina 700 Manual

Creative embroidering
Prerequisite:
• Any two points of the embroidery motif are marked with chalk or a water-soluble pen on the fabric. The
> Select the embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Pinpoint placement».
> Touch the icon «Place points as desired».
> Define a desired point within the embroidery motif.
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to the left or to the right to
> Touch the icon «SET» to confirm the altered position.
SET
SET SET
SET SET SET SET SET
> Select the second positioning point of the embroidery motif.
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to the left or to the right to
> Touch the icon «SET» again to confirm the altered position.
> Touch the icon «Reset Pinpoint placement» to reset the alterations to basic setting.

5.7 Combining embroidery motifs

Combining embroidery motifs
In the Combi-Mode several embroidery motifs can be combined.
> Select the embroidery motif.
> Touch the icon «Add an embroidery motif» (1).
76
place or the location where the embroidery motif is to be positioned is clearly visible.
– The positioning point is displayed.
position the needle above the respective mark on the fabric.
– The point changes its color and is defined.
position the needle above the respective mark on the fabric.
– The point changes its color and is defined. The embroidery motif is adjusted accordingly.
0371485.0.04_2016-05_Manual_B700