Table of Contents
Advertisement
Errors and faults
13 Errors and faults
13.1 Error messages
Message on the display
Insufficient free space on the
BERNINA USB stick (optional
accessory).
112
Cause
Stitch number unknown.
The stitch pattern cannot be
selected in the Combi-mode.
The feed dog is not lowered.
The selected needle and stitch
plate cannot be used in
combination.
The needle is not at its top end.
The main motor is not running.
There is not enough free capacity
on the BERNINA USB stick
(optional accessory).
Solution
> Check the entry and enter the new number.
> Combine other stitches.
> Push the button «Feed dog up/down» to lower the feed
dog.
> Replace the needle.
> Replace the stitch plate.
> Adjust the needle position via the handwheel.
> Turn the handwheel clockwise until the needle is at its
top position.
> Remove the sewing project. Do not pull on the fabric or
the thread.
> Remove the stitch plate.
> Remove the thread remnants.
> Clean the hook.
> Remove the hook and make sure that there are no
pieces of broken needle points on the magnetic back of
the hook.
> Make sure that the BERNINA USB stick (optional
accessory) is used.
> Delete data from the BERNINA USB stick (optional
accessory).
Advertisement
Table of Contents
