> Tap «Update Firmware».
UPDATE
> To start the firmware update, tap «Update»
Update
. Please note: The update may take several minutes. During the update, do not switch the machine off
and do not remove the USB stick.
–
The machine restarts. Once the update is complete, a message appears.
Recovering saved data
If personal data and settings after a software update are not available anymore, they can be transferred to
the machine again afterwards.
> Insert the BERNINA USB stick which provides the saved data and settings into the USB port of the
machine.
> Tap «Home».
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Maintenance/Updates».
> Tap «Update Firmware».
UPDATE
The BERNINA USB stick (optional accessory) has been removed too early
NOTICE
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred
successfully.
> Tap «Load Data».
–
After the data has been transferred, a green tick is temporarily displayed.
12.2 Machine
Cleaning the display
> Clean the display in the switched off status with a soft slightly damp microfiber cloth.
Care and maintenance
107