Recovering Saved Data - Bernina 570 QE User Manual

Setup Program
> Insert the BERNINA USB stick (optional accessory), FAT32 formatted, providing the latest software into
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Update the machine».
UPDATE
> Touch the icon «Save data on USB stick».
> To start the firmware update, touch the icon «Update».
Update
Update

Recovering saved data

If personal data and settings after a software update are not available anymore, they can be transferred to
the machine again afterwards.
The BERNINA USB stick (optional accessory) has been removed too early
NOTICE
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred
> Insert the BERNINA USB stick (optional accessory) providing the saved data and settings into the USB port
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Update the machine».
UPDATE
66
the port.
– The icon is checkmarked in green.
successfully.
of the machine.