Configuring Hot Links - IBM RackSwitch G8000 Application Manual

A top-of-rack (tor) switch

Hide thumbs Also See for RackSwitch G8000:

Table of Contents

Configuring Hot Links

Use the following commands to configure Hot Links.

RS G8000(config)# hotlinks trigger 1 enable

RS G8000(config)# hotlinks trigger 1 master port 1 (Add port to Master interface)

RS G8000(config)# hotlinks trigger 1 backup port 2 (Add port to Backup interface)

RS G8000(config)# hotlinks enable

(Enable Hot Links Trigger 1)

(Turn on Hot Links)

Chapter 23. Basic Redundancy