IBM RackSwitch G8000 Application Manual page 318

316
RackSwitch G8000: Application Guide
Using the CLI the following command displays remote LLDP information:
RS G8000(config)# show lldp remote-device [<index number>]
To view a summary of remote information, omit the Index number parameter. For
example:
RS G8000(config)# show lldp remote-device
LLDP Remote Devices Information
LocalPort | Index | Remote Chassis ID
Name
----------|-------|----------------------|-------------|--------------
-------
3 | 1 | 00 18 b1 33 1d 00
To view detailed information for a remote device, specify the Index number as found
in the summary. For example, in keeping with the sample summary, to list details for
the first remote device (with an Index value of 1), use the following command:
RS G8000(config)# show lldp remote-device 1
Local Port Alias: 3
Remote Device Index
Remote Device TTL
Remote Device RxChanges : false
Chassis Type
Chassis Id
Port Type
Port Id
Port Description
System Name
System Description : BNT 1/10Gb Uplink Ethernet Switch Module,
System Capabilities Supported : bridge, router
System Capabilities Enabled
Remote Management Address:
Subtype
Address
Interface Subtype
Interface Number
Object Identifier
Note: Received LLDP information can change very quickly. When using show
commands, it is possible that flags for some expected events may be too
short-lived to be observed in the output.
| Remote Port | Remote System
| 23
: 1
: 99
: Mac Address
: 00-18-b1-33-1d-00
: Locally Assigned
: 23
: 7
:
flash image: version 5.1.0,
boot image: version 5.1.0.12
: bridge, router
: IPv4
: 10.100.120.181
: ifIndex
: 128
:
|