© Copyright IBM Corp. 2011
5. Define the VM group.
RS G8000(config)# virt vmgroup 1 profile Finance
RS G8000(config)# virt vmgroup 1 vm arctic
RS G8000(config)# virt vmgroup 1 vm monster
RS G8000(config)# virt vmgroup 1 vm sierra
RS G8000(config)# virt vmgroup 1 vm 00:50:56:4f:f2:00
RS G8000(config)# virt vmgroup 1 portchannel 1
When VMs are added, the server ports on which they appear are automatically
added to the VM group. In this example, there is no need to manually add ports
1 and 2.
6. If necessary, enable VLAN tagging for the VM group:
RS G8000(config)# virt vmgroup 1 tag
Note: If the VM group contains ports that also exist in other VM groups, make sure
tagging is enabled in both VM groups. In this example configuration, no ports
exist in more than one VM group.
7. Save the configuration.
179
Chapter 14. VMready