Additional References - IBM RackSwitch G8000 Application Manual

Additional References

© Copyright IBM Corp. 2011
Part 6: High Availability Fundamentals
• Chapter 23, "Basic Redundancy,"
redundancy through stacking, trunking, Active Multipass Protocol (AMP), and
hotlinks.
• Chapter 24, "Layer 2 Failover,"
high-availability network topologies using Layer 2 Failover.
• Chapter 25, "Virtual Router Redundancy Protocol,"
supports high-availability network topologies using Virtual Router Redundancy
Protocol (VRRP).
Part 7: Network Management
• Chapter 26, "Link Layer Discovery Protocol,"
Discovery Protocol helps neighboring network devices learn about each others'
ports and capabilities.
• Chapter 27, "Simple Network Management
the switch for management through an SNMP client.
Part 8: Monitoring
• Chapter 28, "Remote Monitoring,"
on the switch, so that the switch can exchange network monitoring data.
• Chapter 29, "sFlow, described how to use the embedded sFlow agent for
sampling network traffic and providing continuous monitoring information to a
central sFlow analyzer.
• Chapter 30, "Port Mirroring,"
monitor port for network analysis.
Part 9: Appendices
• Appendix A, "Glossary," describes common terms and concepts used throughout
this guide.
Additional information about installing and configuring the G8000 is available in the
following guides:
• RackSwitch G8000 Installation Guide
• IBM Networking OS 6.8 Command Reference
• IBM Networking OS 6.8 ISCLI Reference Guide
• IBM Networking OS 6.8 BBI Quick Guide
describes how the G8000 supports
describes how the G8000 supports
describes how the G8000
describes how Link Layer
Protocol," describes how to configure
describes how to configure the RMON agent
discusses tools how copy selected port traffic to a
17
Preface