IBM RackSwitch G8000 Application Manual page 328

326
RackSwitch G8000: Application Guide
Table 25. IBM N/OS-Supported Enterprise SNMP Traps (continued)
Trap Name
altSwVrrpNewBackup
altSwVrrpAuthFailure
altSwLoginFailure
altSwTempExceedThreshold
altSwTempReturnThreshold
altSwStgNewRoot
altSwStgTopologyChanged
altSwStgBlockingState
altSwCistNewRoot
altSwCistTopologyChanged
altSwHotlinksMasterUp
altSwHotlinksMasterDn
altSwHotlinksBackupUp
altSwHotlinksBackupDn
altSwHotlinksNone
Description
Indicates that the sending agent has
transitioned to "Backup" state.
Signifies that a packet has been received from
a router whose authentication key or
authentication type conflicts with this router's
authentication key or authentication type.
Implementation of this trap is optional.
Signifies that someone failed to enter a valid
username/password combination.
Signifies that the switch temperature has
exceeded maximum safety limits.
Signifies that the switch temperature has
returned to under maximum safety limits.
Signifies that the bridge has become the new
root of the STG.
Signifies that there was a STG topology
change.
An altSwStgBlockingState trap is sent
when port state is changed in blocking state.
Signifies that the bridge has become the new
root of the CIST.
Signifies that there was a CIST topology
change.
Signifies that the Master interface is active.
Signifies that the Master interface is not active.
Signifies that the Backup interface is active.
Signifies that the Backup interface is not
active.
Signifies that there are no active interfaces.