Iscli Stacking Commands - IBM RackSwitch G8000 Application Manual

ISCLI Stacking Commands

164
RackSwitch G8000: Application Guide
Stacking-related ISCLI commands are listed here. For details on specific
commands, see the RackSwitch G8000 ISCLI Reference.
• [no] boot stack enable
• boot stack higig-trunk <port list>
•
boot stack mode master|member
• boot stack push-image boot-image|image1|image2 <asnum>
•
boot stack vlan <VLAN> <asnum>|master|backup|all
• default boot stack <asnum>|master|backup|all
• [no] logging log stacking
•
no stack backup
•
no stack name
• no stack switch-number <csnum>
•
show boot stack <asnum>|master|backup|all
•
show stack attached-switches
•
show stack backup
•
show stack dynamic
•
show stack link
•
show stack name
• show stack path-map [<csnum>]
•
show stack push-status
•
show stack switch
• show stack switch-number [<csnum>]
•
show stack version
•
stack backup <csnum>
• stack name <word>
•
stack switch-number <csnum> bind <asnum>
• stack switch-number <csnum> mac <MAC address>