IBM RackSwitch G8000 Application Manual page 53

© Copyright IBM Corp. 2011
11. Select the OS Image to download. The XModem initiates the file transfer. When
the download is complete, a message similar to the following is displayed:
yzModem - CRC mode, 27186(SOH)/0(STX)/0(CAN) packets, 6 retries
Extracting images ... Do *NOT* power cycle the switch.
**** Switch OS ****
Please choose the Switch OS Image to upgrade [1|2|n] :
12. Select the image number to load the new image (1 or 2). It is recommended
that you select 1. A message similar to the following is displayed:
Switch OS Image 1 ...
Un-Protected 27 sectors
Erasing Flash.............................. done
Writing to Flash..............................done
Protected 27 sectors
13. When you see the following message, change the Serial Port characteristics to
9600 bps:
## Switch baudrate to 9600 bps and press ESC ...
14. Press the Escape key (<Esc>) to re-display the Boot Management menu.
15. Select 4 to exit and boot the new image.
Chapter 3. Switch Software Management
51