Igmp Snooping Configuration Example - IBM RackSwitch G8000 Application Manual

IGMP Snooping Configuration Example

220
RackSwitch G8000: Application Guide
This section provides steps to configure IGMP Snooping on the G8000.
1. Configure port and VLAN membership on the switch.
2. Add VLANs to IGMP Snooping.
RS G8000(config)# ip igmp snoop vlan 1
3. Enable IGMP Snooping.
RS G8000(config)# ip igmp snoop enable
4. Enable IGMPv3 Snooping (optional).
RS G8000(config)# ip igmp snoop igmpv3 enable
5. Enable the IGMP feature.
RS G8000(config)# ip igmp enable
6. View dynamic IGMP information.
RS G8000# show ip igmp groups
Note: Local groups (224.0.0.x) are not snooped/relayed and will not
appear.
Source
-------------- --------------- ------- ------ --------
10.1.1.1 232.1.1.1
10.1.1.5 232.1.1.1
* 232.1.1.1
10.10.10.43 235.0.0.1
* 236.0.0.1
RS G8000# show ip igmp mrouter
VLAN Port
------ -------
1 4
2 3
These commands display information about IGMP Groups and Mrouters learned by
the switch.
Group VLAN Port
2 4
2 4
2 4
9 1
9 1
Version Expires Max Query Resp. Time
-------- -------- --------------------
V2 static -
V3 4:09 128
Version Mode Expires
----- -------
V3 INC 4:16
V3 INC 4:16
V3 INC -
V3 INC 2:26
V3 EXC -
QRV QQIC
--- ----
- -
2 125
Fwd
---
Yes
Yes
No
Yes
Yes