Multiple As/400 Message Queues; Configuration File; Using Ftp To Execute As/400 Commands - IBM Enterprise Console Manual

Ibm enterprise console adapters guide

Table of Contents

3. Create the program and put it in the QSYS library:

Multiple AS/400 Message Queues

To support another AS/400 message queue, create the following additional files:

v Configuration file: specifies a different message queue for the MsgQueue

v CDS file: defines new classes to match the messages being monitored

v BAROC file: required if new classes are identified in the CDS file

To create the configuration file, perform the following steps:

1. Copy the adapter files using the following commands:

2. Update the configuration file to show the keywords pointing to the new objects

3. Update the CDS and the BAROC files to include any new classes and filters.

4. On the event server, import the BAROC file into the rule base; then, compile

5. Start the adapter using the new configuration files as follows:

You can execute AS/400 commands from an FTP session. This can be useful for

replying to inquiry messages. The following is an example of how to use FTP to

remotely respond to an AS/400 inquiry message based on the message key that is

part of the event string:

Note: The start-up program runs under user profile QPGMR. By default,

QPGMR does not have authority to change the AS/400 message adapter

commands and programs. You must either grant QPGMR authority to

change the commands and programs (see "Starting the Adapter" on

page 45) or have the start-up program adopt QSECOFR authority and be

owned by QSECOFR.

keyword and any new filters

as follows:

and load the rule base.

Chapter 3. AS/400 Message Adapter

Table of Contents