Body Repair Systems - Mercedes-Benz Series 176 Introduction Into Service Manual

The following scopes are available for model series 176 in addition to each existing body repair system from
manufacturers CELETTE, CAR BENCH and CAR-O-LINER:
Manufacturer CELETTE
Article Straightening tool-
supplementary set
Portal straightening
supplementary set
Order number 7176.509
7176.800
Source in CELETTE
Germany Vertriebs GmbH
Eugen-Ensslin-Straße 3
77694 Kehl-Sundheim,
Germany
www.celette.de
Source outside CELETTE FRANCE S.A.S.
Germany 3. Avenue Marcelin
Berthelot
F-38200 Vienne
France
Note Only in combination with
basic straightening set:
- 7246.500
For post-accident alignment checking of body areas the "SHARK" measuring system from the Blackhawk
has been approved.
– This printout will not be recorded by the update service. Status: 06 / 2012 –

Body repair systems

CAR BENCH
Data sheet
A4244201/EVO
HSK
Karosseriegeräte-
Vertriebs-GmbH
Am Fliegerhorst 3
D-63762 Großostheim-
Ringheim
www.carbench.de
CAR BENCH
International S.p.A.
Via Dorsale 22
I-54100 Massa
Italy
Only available in combina-
tion with PAC.SA/8 or
complete as PACDIMA.8
(Basic Mercedes system).
When using the previously
valid multipurpose straight-
ening set A 353 it should be
noted that supplementary
kit A 353 KITEVO has to be
upgraded to A 353 EVO.
Introduction of the New A-Class, Model Series 176
CAR-O-LINER
Data sheet
14:148
Car-O-Liner
Vogesenstraße 3
63811 Stockstadt,
Germany
www.car-o-liner.de
Car-O-Liner
Box 7
S-73621 Kungsör
Sweden
To use the straightening set
EVO 3.3 the standard
package
EVO1-3.1, straightening
frame and the electronic
measuring system must be
available. Details are avail-
able in the Mercedes-Benz
System Catalog. This is
available from the
CAR-O-LINER company.
b 101