Hach Anatel PAT700 User Manual page 95

Figure 72 Review test setup dialog box
• Test setup text lists the bottles that are loaded, test completion actions,
acceptance criteria, and, if applicable, schedule.
• Bottles icon takes you to the change settings dialog box, where you can change
the acceptance limits and completion actions for each test. If you are not signed
on as an administrator, you are prompted to enter the administrator user ID and
password. Successfully entering this information displays the dialog box. The
administrator logon is valid only while you are in that dialog box. An unsuccessful
logon produces an error.
• Schedule icon takes you to the schedule test dialog box. See
• Run now button takes you to the run test dialog box.
• Cancel icon takes you to the unload/replace bottles dialog box. All changes made
in any of the dialog boxes are lost.
Figure 73 Enter bottle information dialog box
• Lot ID text box allows you to enter an identification code for the lot.
Bottle Mode
Figure 74.
Figure 75.
Page 93