Hach Anatel PAT700 User Manual page 109

Figure 86 Load bottles dialog box, grab sample
• Bottle positions graphics show you where to install the bottle.
• Unlock icon energizes the bottle bay door lock for five seconds, allowing you to
open the door.
• Back icon takes you to the bottle mode dialog box.
• Forward icon takes you to the grab sample setup dialog box.
• Cancel icon returns you to the previous dialog box. All changes made in any of
the dialog boxes are lost.
5. Close the bottle bay door.
6. Touch the forward icon. The enter bottle information dialog box appears and allows
you to enter information about the grab sample.
7. After entering the appropriate information about the grab sample, touch the forward
icon. The grab sample setup dialog box appears. See
Figure 87 Grab sample setup dialog box
• Bottle ID text box allows you to specify an identifier to be used in the data buffer
and in reports. You may specify a 4-digit number. The default setting is 0.
Bottle Mode
Figure 87.
Page 107