Starting The Pc And Operating Software - Siemens MicroSAM Operating Instructions Manual

Commissioning and operation

5.4 Starting the PC and operating software

5.4 Starting the PC and operating software
The factor setting for the IP address of the gas chromatograph is 161.218.51.xx. The subnet
mask is always set to 255.255.255.0.
Requirement
● Manually set the IP address of the PC to a value between 161.218.51.0 and
● The connection between the PC and gas chromatographs has been made, and the
Procedure
Start the program "Maxum System Manager" (start bar Start ➜ Programs ➜ Maxum System
Tools ➜ Maxum System Manager).
Start the function "Add Unit" (Menu "System" ➜ Menu command "Add Unit") and enter the
new gas chromatographs.
Note
Operating software
The following are described in detail in the Maxum System Manager manual:
 Installation of the Maxum System Manager and EZChrom operating software.
 Establishment of connection between PC and gas chromatographs.
74
161.218.51.255 with the subnet mask 255.255.255.0.
The PC must not have the same IP address as the gas chromatograph.
We therefore recommend the IP address 161.218.51.254.
Windows XP operating system has been started.
Operating Instructions, 06/2012, C79000-G5376-C560-07
MicroSAM