Temperature Control Systems - Siemens MicroSAM Operating Instructions Manual

3.6.9

Temperature control systems

Previously available temperature control systems
The device previously featured three temperature control systems:
● Two temperature control systems heated the column and the detectors. They are located
● The third temperature control system heated the pneumatic connectors.
Additional fourth temperature control system
The fourth temperature control system is located on devices as of release version 10 at the
sample inlet of the MicroSAM:
①
②
③
MicroSAM
Operating Instructions, 06/2012, C79000-G5376-C560-07
in the analysis module.
Fourth temperature control system at the sample inlet
Sample path in the heated copper tube
Access to the pneumatic connector
Description
3.6 Functions
53