Table of Contents
Advertisement
●
Perform Easy Setup
Necessary settings for displaying network camera images on the monitor.
1.
Start up the network camera(s).
For network camera setup, refer to the network camera's manual.
Attention
• This product uses ONVIF to connect to other than Panasonic network cameras. Check if ONVIF is enabled in
the settings of the camera.
2.
Press
on the remote control to turn on the monitor.
The live image screen is displayed.
Note
• The monitor can also be turned on by pressing
Attention
• The monitor starts up in approximately one minute. (A rotating bar indicating startup is displayed.) Do not turn
off the monitor during startup.
• When the monitor is started up for the first time, a menu for operating the monitor and network cameras is
displayed.
• When no network camera is registered, a "Not Registered" message is displayed at the network camera
image display area.
Network camera image display area
on the front of the monitor.
Menu
Message display area
9
Advertisement
Table of Contents
