Choosing Modem Settings - Paradyne COMSPHERE 6700 Series Network Configuration Manual

Custom Network Interface Settings

Choosing Modem Settings

5-6
Use Modem... to specify modem interaction commands and modes for SLIP
interfaces.
Procedure
1. Choose Settings... from the Network menu. The
shown on page 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Modem... from the Setup menu. The Modem Settings dialog box
appears.
Table 5-4 describes the fields on the Modem Settings dialog box.
4. Select the appropriate modem from those listed under Modem Defaults. The
Network Configuration feature then uses default commands based on your
choice.
If your modem is not listed, select Hayes which works across almost all
modem types. Select None to indicate a direct null-modem connection, which
does not require any dial.
NOTE:
If your modem requires special settings, refer to Table 5-4 and the
manual provided by your modem vendor.
5. Choose OK.
February 1998
Custom window appears, as
6700-A2-GB22-20