8.34
M06, base 100 mm high, RAL 7022
Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Modules
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Booksize Base Cabinets
● Chassis format Motor Modules
● Central Braking Modules
● Auxiliary Power Supply Modules
Description
Because it is raised 100 mm, the supplementary cabinet base allows for greater bending
radii for cables (cable inlet from below) and cable routing within the base.
The cabinet base comes completely assembled and is usually color RAL 7022.
Table 8- 61
Components of the cabinet base
Component
1 x base element (rear)
1 x base element (front)
Base covers
(option M26/M27 only)
4 x cover caps
Connection to the foundation
To connect the cable marshalling compartment to the foundation, four holes for M12 screws
are provided. These are in line with the holes in the cabinet. The fixing dimensions are
specified on the associated dimension drawings.
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A
Connection element
8.34 M06, base 100 mm high, RAL 7022
Fixing elements
On the cabinet:
The cabinet base is shipped pre-assembled.
On the foundation:
The holes are in line with the holes in the
cabinet (see dimension drawings).
Options
451