Displaying And Editing Base Zero Offset - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Setting up the machine
2.5 Zero offsets
Procedure
2.5.3
Displaying and editing base zero offset
The defined channel-specific and global base offsets, divided into coarse and fine offsets,
are displayed for all set-up axes in the "Zero offset - Base" window.
Procedure
Note
Activate base offsets
The offsets specified here are immediately active.
66
1.
Select the "Parameter" operating area.
2
Press the "Zero offset" and "Overview" softkeys.
The "Zero Offsets - Overview" window opens.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Zero offset" softkey.
3.
Press the "Base" softkey.
The "Zero Offset - Base" window is opened.
4.
You can edit the values directly in the table.
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Universal
Advertisement
Table of Contents
